Reply to thread

Message: [QUOTE="QuickDraw, post: 3254976, member: 10020"] I installed a 24k BTU unit in my home 3 yrs ago. Very simple to install, just get a HVAC tech to cut, flare & connect the lines, draw a vacuum to evacuate any air from the lines and you are good to go. I installed a Blueridge unit which is manufactured by Gree, there are others like AirCon which is a Mitsubishi if you don't want to pay for a name brand. Mine cost $1300 + 300 for the tech (all in $1600+3hrs of my time. Cost of operation can vary depending on unit output, average daily temp, & how tight your home is. The unit I have is only good for heat with temps above 40Degrees outside, some units will work in colder temps but I got mine primarily for A/C . This past July my bill was about $50-$60 more than May, it ran full time during that month with out a break and we stayed nice and cool. [/QUOTE]